By Pete | My Husband’s Nook
That is one among our favourite RV ideas and hacks for do it your self campers! Don’t know easy methods to maintain RV awnings from flapping? Use my DIY RV awning tie down hack!
The greatest tenting gear just isn’t essentially manufactured in a manufacturing facility, it could come out of your personal toolbox!
Psst we’re compensated…see our disclosures.
The Drawback: Noisy RV Awning Flapping In Wind
We hate the noise made by a retractable RV awning when it’s flapping within the wind! Once we purchased our newest RV, we had been on our first journey once we realized our outdated RV awning tiedown strap was not lengthy sufficient for our new energy awning!
So, it’s a good factor we apply what we preach … one among our RV tenting ideas for inexperienced persons is to deliver instruments and spare components! I had to determine easy methods to tie down an awning with the provides I had in my device field! Seems … this DIY hack works higher than our outdated conventional awning strap package! I created this VIDEO to indicate you easy methods to tie down your RV patio awning with my DIY hack!
8 Steps: How To Tie Down Your RV Awning
Use these similar steps whether or not you’ve gotten a handbook awning or electrical one.
Step 1:
Hammer the Stake into the bottom straight below the skin nook of your RV awning arms … similar to I did in my video.
Step 2:
Tighten the stress of the awning rafter arm.
I would like “5 Secrets and techniques To Profitable Tenting Journeys” plus weekly tenting ideas & recipes.
Step 4:
Minimize the 1/8-Inch Nylon Rope to the suitable measurement (our awning required about 10 ft).
Then tie one finish of the rope to the carabiner clip.
Now take the opposite finish of the rope and run it by the 2 holes within the LARGE camring after which tie a knot on the finish.
1/8 Inch 100% Nylon Rope Strong Braid – Industrial Grade – Excessive UV and Abrasion Resistance
NOTE: Should you tie the knot in the long run of the rope earlier than you string it by the LARGE camring, you gained’t get it by the camring holes.
Comply with the sequence as I describe it right here to keep away from frustration. *fistbump*
Step 6:
Run the knotted finish of the rope by the stake.
NOTE: The knot (you probably did this in step 4) ultimately holds the rope in place within the camring notch … similar to you see within the step 7 image.
Step 8:
With a slight quantity of stress, pull down on the carabiner clip to tighten bungee whereas adjusting the LARGE camring (up or down) to take away slack from the wire.
Repeat steps on the opposite finish of the awning.
BAM … You’re Executed!
Now that your RV awning tie down mission is full, you’ve gotten it protected from the wind while you’re tenting within the rain or sunshine! You gained’t should hearken to that annoying noise that may drive a sane man loopy!
That’s easy methods to maintain your RV awning from flapping within the wind AND keep away from marriage counseling on the similar time! Ha! Now sit back and camp! P.S. This hack works on tent cover awnings too!
By no means Depart Unattended
It doesn’t matter what kind of system you utilize, all of them have restrictions and might solely deal with masses as much as a sure variety of lbs. That’s why you must at all times take away your tie down and retract your awning so it’s securely locked in place if you find yourself away out of your rig.
Electrical Awnings & Wind Sensors
Should you’re RVing in a elaborate rig, you’ll have wind sensors inbuilt to your electrical awnings. When the wind exceeds the restrict, the awning robotically retracts … you don’t even should push a button! When you’ve got this setup, you don’t need something tying down the awning except it robotically releases to permit the awning to robotically retract at any given time.
VIDEO: Watch How You Do It
Print These Directions
How To Preserve RV Awning From Flapping With DIY RV Awning Tie Down Hack
Tenting For Foodies RV and Tent Tenting Ideas: How To Preserve RV Awning From Flapping With DIY RV Awning Tie Down Hack
Yield: 1 Pair Of RV Awning Tie Downs
Price: $30
-
Hammer the Stake into the bottom straight below the skin nook of your RV awning arms … similar to I did in my video.
-
Tighten the stress of the awning rafter arm.
-
Grasp the Bungee over the nook of the awning construction (see photograph above).
-
Minimize the 1/8-Inch Nylon Rope to the suitable measurement (our awning required about 10 ft). Then tie one finish of the rope to the carabiner clip. Now take the opposite finish of the rope and run it by the 2 holes within the LARGE camring after which tie a knot on the finish. NOTE: Should you tie the knot in the long run of the rope earlier than you string it by the LARGE camring, you gained’t get it by the camring holes.
-
Grasp the Carabiner Clip from the bungee hooks and simply let the rope hold down towards the stake.
-
Run the knotted finish of the rope by the stake. NOTE: The knot (you probably did this in step 4) ultimately holds the rope in place within the camring notch.
-
Run the rope by the notch within the LARGE CamRing Tent Twine Tensioner.
-
With a slight quantity of stress, pull down on the carabiner clip to tighten bungee whereas adjusting the LARGE camring (up or down) to take away slack from the wire.
-
Repeat steps on the opposite finish of the awning.
-
All the time take away your tie down and retract your awning if you find yourself away out of your rig.
Please see video for additional directions.
Conventional RV Awning Tie Down Kits
The extra conventional strategies of easy methods to tie down an awning are available in just a few types. Listed below are just a few choices:
Camco Awning De-Flapper Max
The Camco Awning De-Flapper Max works by clipping 8″ large grippers to your awning then makes use of velcro-like hook and loop fastener straps mixed with sturdy nylon to connect the devices to the facet awning arms to stop flapping in gentle windy and wet circumstances.
Camco Awning De-Flapper Max – Protects Your RV Awning From Pricey Rips and Tears, Rust Resistant
The factor that’s distinctive about this gadget is that it doesn’t use any kind of awning stakes within the floor. It solely attaches the awning material to the help arms. These are greatest for breezy circumstances while you need peaceable leisure on the campsite with fundamental safety requiring minimal effort to put in. If you’re leaving the world, you must take away the grippers and retract your awning to be secure from surprising sudden winds.
Many RVers use this together with some form of ratchet straps or a wrinkle resistant, heavy responsibility pull strap with triangle rings to safe their construction to the bottom. One of the vital in style and reasonably priced selections is the JR Merchandise 25 Foot RV Awning Tie Down we’re discussing subsequent.
JR Merchandise 25 Foot RV Awning Tie Down
The JR Merchandise 25 Foot RV Awning Tie Down design is without doubt one of the mostly used ready-made devices to maintain an RV awning from flapping.
JR Merchandise 25 foot Awning Tie Down
The strap runs throughout the highest of your awning after which drops right down to the bottom the place it’s connected by stakes and the stress spring supplies the rigidity to the awning. As a result of the strap runs the size of the awning, this package doesn’t match each scenario … it solely matches awnings as much as 25 ft.
Camco Anchor Awning Strap Package
The Camco Anchor Awning Strap Package is just like our DIY hack design in that you’re anchoring each ends of your awning to the bottom. This awning anchor package makes use of spiral stakes that present further holding energy since you twist them into the bottom.
Camco Awning Anchor Package with Pull Stress Strap
The sturdy strap snugs over the awning and two springs present the stress wanted to scale back the affect of awning flutter due to winds. A ground-anchored gadget handles extra intense winds from mom nature versus gadgets that can simply connect the material to the body.
How A lot Wind Can An RV Awning Stand up to?
It doesn’t matter what methodology you utilize to safe your awning, actually sturdy winds can exceed the aptitude of the gadget you’re utilizing to guard it.
How a lot is an excessive amount of if you find yourself coping with excessive winds? There is no such thing as a actual reply to this query … use widespread sense on the subject of retracting your awning so that you don’t find yourself having to exchange it.
This RV homeowners discussion board has an excellent dialogue about max wind speeds and easy methods to maintain RV awning from flapping with out working the danger of damaging the material, {hardware} and even your RV itself.
Your Instruments
Once you plan your RV journeys, concentrate on distinctive traits of the placement the place you may be tenting and convey acceptable instruments.
I carry numerous miscellaneous objects in my device field so I’m prepared for any shock I’ll encounter on our tenting journeys.
We created a very cool RV Device Package Guidelines you possibly can obtain without cost so go seize a replica for your self. You possibly can thank me later!
